Edit Content
Mirror laser sandblasting machine
Series Offers:
- Mirror laser sandblasting machine covers a small area, a 1300*2500mm equipment, covers only 6 square meters, a large amount of saving the use of the factory area;
- Low power consumption, a machine 1 hour only 1.5kw power consumption, has a very low cost;
- Save artificial 0 consumables, because of the characteristics of laser, directly carved on the mirror frosted and transparent two forms, do not need to peel film, do not need to spray paint, 0 consumables use;
- There are no wearing parts, the laser is non-contact processing, there is no direct impact on the material during processing, so there is no mechanical deformation; There is no “tool” wear and no “cutting force” acting on the material during laser processing;
- Long life, the custom laser source has a life of 100,000 hours, 3,000 hours per year, and the life can reach more than 10 jaren!
Mirror laser paint remover
Series Offers:
- New Hybrid Servo Motors
- 4-Way Material Pass Through
- 70 To 250 Watts Of Co2 Power
- Work Areas From 14″ X 20″ Up To 55″ X 98″
- Cut/Engrave Acrylic, Wood & Organics
- Engrave Most Metals
- HP Series Cuts Up To 14ga Stainless Steel
- LS Series Starts At $4,997
Spiegellasergraveermachine
Series Offers:
- New Hybrid Servo Motors
- 4-Way Material Pass Through
- 70 To 250 Watts Of Co2 Power
- Work Areas From 14″ X 20″ Up To 55″ X 98″
- Cut/Engrave Acrylic, Wood & Organics
- Engrave Most Metals
- HP Series Cuts Up To 14ga Stainless Steel
- LS Series Starts At $4,997
Edit Content
Large format laser etching machine
Series Offers:
- 0 pollution
- High precision
- Custom size
- Factory direct sales
- Thousands of design drawings are free to use
Precision laser cutting machine Linear motor
Series Offers:
- 600 * 600mm
- The cutting section is smooth without burrs and deformation
- High positioning accuracy, sensitive response
CO2 LASER CUTTING & ENGRAVING
Series Offers:
- New Hybrid Servo Motors
- 4-Way Material Pass Through
- 70 To 250 Watts Of Co2 Power
- Work Areas From 14″ X 20″ Up To 55″ X 98″
- Cut/Engrave Acrylic, Wood & Organics
- Engrave Most Metals
- HP Series Cuts Up To 14ga Stainless Steel
- LS Series Starts At $4,997
TRUSTED BY SOME OF THE BEST
Boss Laser is proud to work with some of the largest companies in the country.