Mirror laser sandblasting machine
Series Offers:
- Mirror laser sandblasting machine covers a small area, a 1300*2500mm equipment, covers only 6 square meters, a large amount of saving the use of the factory area;
- Low power consumption, a machine 1 hour only 1.5kw power consumption, has a very low cost;
- Save artificial 0 consumables, because of the characteristics of laser, directly carved on the mirror frosted and transparent two forms, do not need to peel film, do not need to spray paint, 0 consumables use;
- There are no wearing parts, the laser is non-contact processing, there is no direct impact on the material during processing, so there is no mechanical deformation; There is no “tool” wear and no “cutting force” acting on the material during laser processing;
- Long life, the custom laser source has a life of 100,000 часове, 3,000 hours per year, and the life can reach more than 10 години!
Mirror laser paint remover
Series Offers:
- New Hybrid Servo Motors
- 4-Way Material Pass Through
- 70 To 250 Watts Of Co2 Power
- Work Areas From 14″ X 20″ Up To 55″ X 98″
- Cut/Engrave Acrylic, Wood & Organics
- Engrave Most Metals
- HP Series Cuts Up To 14ga Stainless Steel
- LS Series Starts At $4,997
Огледална машина за лазерно гравиране
Series Offers:
- New Hybrid Servo Motors
- 4-Way Material Pass Through
- 70 To 250 Watts Of Co2 Power
- Work Areas From 14″ X 20″ Up To 55″ X 98″
- Cut/Engrave Acrylic, Wood & Organics
- Engrave Most Metals
- HP Series Cuts Up To 14ga Stainless Steel
- LS Series Starts At $4,997
Large format laser etching machine
Series Offers:
- 0 pollution
- High precision
- Custom size
- Factory direct sales
- Thousands of design drawings are free to use
Precision laser cutting machine Linear motor
Series Offers:
- 600 * 600мм
- The cutting section is smooth without burrs and deformation
- High positioning accuracy, sensitive response
CO2 LASER CUTTING & ENGRAVING
Series Offers:
- New Hybrid Servo Motors
- 4-Way Material Pass Through
- 70 To 250 Watts Of Co2 Power
- Work Areas From 14″ X 20″ Up To 55″ X 98″
- Cut/Engrave Acrylic, Wood & Organics
- Engrave Most Metals
- HP Series Cuts Up To 14ga Stainless Steel
- LS Series Starts At $4,997
LOOK WHAT’S POSSIBLE
TRUSTED BY SOME OF THE BEST
Boss Laser is proud to work with some of the largest companies in the country.
WHY COMPANIES CHOOSE КАТО ЛАЗЕР
LIKE Laser is proud to work with some of the largest companies in the country.
CUSTOMER REVIEWS
